To receive competitive purchasing options on part number MS25038-4 by Aircraft Appliances And Equipment, look no further than NSN Direct. For your reference, this item has the NSN 6680-00-553-8892 and is listed with the description “Generator Tachometer.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Aircraft Appliances And Equipment parts produced under the CAGE Code 35076, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number MS25038-4, you can glean from the first four digits of its NSN 6680-00-553-8892 that it belongs to the FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. This being said, do not hesitate to request quotes on part number MS25038-4 and any other NSN parts that we feature to experience unrivaled procurement.
| MRC | Criteria | Characteristic |
|---|---|---|
| AXGY | Mounting Method | PAD |
| ABWV | Shaft Diameter | 0.310 INCHES MINIMUM SINGLE END AND 0.312 INCHES MAXIMUM SINGLE END |
| BKPC | Calibration Voltage Output Type In Volts | 21.0 AC |
| MRC | Decoded Requirement | Clear Text Reply |
| BFLQ | Calibration Speed In Rpm | 4200 |
| CBBL | Features Provided | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| TEST | Test Data Document | 81349-MIL-G-9398 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CWCS | Length Of Shaft From Housing | 0.467 INCHES SINGLE END |
| AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
| AKCT | Shaft Rotation Direction | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| CWGD | Nominal Center To Center Distance Between Mounting Facilities Parallel To Height | 1.876 INCHES |
| CWFX | Rotor Speed Rating In Rpm | 5500.0 SINGLE FULL LOAD |
| CWFY | Nominal Center To Center Distance Between Mounting Facilities Parallel To Width | 1.876 INCHES |
| TTQY | Terminal Type And Quantity | 1 CONNECTOR, PLUG |
| ABXQ | Flatted Portion Length | 0.431 INCHES MINIMUM SINGLE END AND 0.503 INCHES MAXIMUM SINGLE END |
| AAJU | Overall Length | 4.312 INCHES |
| ASDB | Width Across Flats | 0.243 INCHES MINIMUM SINGLE END AND 0.245 INCHES MAXIMUM SINGLE END |
| CWHZ | Shaft End Characteristic | A15 SINGLE STYLE SINGLE END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
