To receive competitive purchasing options on part number BL92935 by At And T Corp, look no further than NSN Direct. For your reference, this item has the NSN 3020-00-517-0933 and is listed with the description “Gear Bevel.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other At And T Corp parts produced under the CAGE Code 70408, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number BL92935, you can glean from the first four digits of its NSN 3020-00-517-0933 that it belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. This being said, do not hesitate to request quotes on part number BL92935 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-517-0933 Item PartTypeName: GEAR,BEVEL | 3020 | 005170933 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BL92935 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB,FIRST END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB,FIRST END |
| CQFM | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM HUB AND 30.0 ROCKWELL C MAXIMUM HUB |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.793 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.500 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 45.0000 DEGREES |
| CWQD | PITCH ANGLE | 14.5000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.156 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 0.500 INCHES SECOND END |
| MATT | MATERIAL | STEEL COMP 416 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,BACK HUB PROTRUDING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
