To receive competitive purchasing options on part number 09BW2434-6 by Betatronix De Llc, look no further than NSN Direct. For your reference, this item has the NSN 5905-01-170-5757 and is listed with the description “Resistor Variable Wire Wound Pre.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Betatronix De Llc parts produced under the CAGE Code 25413, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 09BW2434-6, you can glean from the first four digits of its NSN 5905-01-170-5757 that it belongs to the FSC 5905 Resistors. This being said, do not hesitate to request quotes on part number 09BW2434-6 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-170-5757 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 011705757 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 09BW2434-6 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 270.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 9.60 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 9.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 80.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 6 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.312 INCHES NOMINAL |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.005 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.004 INCHES |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE,SINGLE THROW,NORMALLY CLOSED |
| AGQL | UNDERCUT LENGTH | 0.406 NOMINAL INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT,RATED AMPERES C AND BETTER |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 275.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/0.25 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 7TH SECONDARY AT 1030 OCLOCK |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/3.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 6 OCLOCK ALL PRIMARIES |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.150 DC |
| FEAT | SPECIAL FEATURES | OUTER SHAFT STOP TORQUE 150.00 OUNCE-INCHES; RUNNING TORQUE 6.00 OUNCE-INCHES; STARTING TORQUE 9.60 OUNCE-INCHES; OUTER SHAFT HAS FLAT WITH DIMENSIONS OF 0.340 INCHES LONG BY 0.219 INCHES HIGH; INNER SHAFT HAS FLAT WITH DIMENSIONS OF 0.340 |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 WIRE LEAD |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 0.875 NOMINAL INCHES |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 1.156 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.500 INCHES MAXIMUM |
| AEDQ | UNDERCUT DIAMETER | 0.125 NOMINAL INCHES |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
