To receive competitive purchasing options on part number X2527 AND X2528 by Bohn Aluminum And Brass Co, look no further than NSN Direct. For your reference, this item has the NSN 3120-00-415-1732 and is listed with the description “Bearing Sleeve.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Bohn Aluminum And Brass Co parts produced under the CAGE Code 99267, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number X2527 AND X2528, you can glean from the first four digits of its NSN 3120-00-415-1732 that it belongs to the FSC 3120 Bearings Plain Unmounted. This being said, do not hesitate to request quotes on part number X2527 AND X2528 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-00-415-1732 Item PartTypeName: BEARING,SLEEVE | 3120 | 004151732 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| X2527 AND X2528 | C | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.3125 INCHES NOMINAL FIRST |
| AAUB | HOLE DIAMETER | 0.3930 INCHES MINIMUM SECOND AND 0.3950 INCHES MAXIMUM SECOND |
| ABHP | OVERALL LENGTH | 3.4790 INCHES MINIMUM AND 3.4850 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 5.1200 INCHES MINIMUM AND 5.1300 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.2400 INCHES MINIMUM AND 0.2420 INCHES MAXIMUM |
| AGKH | LUBRICANT ACCOMMODATION STYLE | GROOVED CIRCULAR |
| BZLX | CORNER SHAPE | RELIEF GROOVE RIGHT FLANGE BODY CORNER |
| BZLX | CORNER SHAPE | RELIEF GROOVE RIGHT FLANGE OUTSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | ROUND INSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | ROUND INSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE LEFT FLANGE BODY CORNER |
| BZLX | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | 1 HOLE AND 2 HOLE |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | 1 INTERNAL |
| MATT | MATERIAL | ALUMINUM OUTER LAYER |
| MATT | MATERIAL | LEAD INNER LAYER AND TIN INNER LAYER |
| MATT | MATERIAL | STEEL COMP 1010 INTERMEDIATE LAYER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MB-8,FSCM 99267 MFR REF SINGLE MATERIAL RESPONSE OUTER LAYER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE INTERMEDIATE LAYER |
| SFTT | SURFACE TREATMENT | TIN INNER LAYER |
| STYL | STYLE DESIGNATOR | SEGMENTED,EXTERNAL FLANGES BOTH ENDS |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MAGNETIC PERMAEABILITY SHALL BELESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD BY A PERMEABILITY INDICATOR SPECIFIED IN MILITARY SPEC MIL-I-17214 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
