To receive competitive purchasing options on part number 220L1-102 by Bourns Instruments Inc, look no further than NSN Direct. For your reference, this item has the NSN 5905-00-474-3656 and is listed with the description “Resistor Variable Wire Wound Non.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Bourns Instruments Inc parts produced under the CAGE Code 80294, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 220L1-102, you can glean from the first four digits of its NSN 5905-00-474-3656 that it belongs to the FSC 5905 Resistors. This being said, do not hesitate to request quotes on part number 220L1-102 and any other NSN parts that we feature to experience unrivaled procurement.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | III OVERALL LENGTH | 1.035 INCHES MINIMUM AND 1.065 INCHES UM" |
| ABJT | TERMINAL LENGTH | 6.000 INCHES NOMINAL" |
| ABKW | III OVERALL HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| ABMK | III OVERALL WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES UM" |
| ABXF | SHAFT LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES UM" |
| ADAQ | BODY LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES UM" |
| ADAT | BODY WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ADAU | BODY HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BEARING" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.745 INCHES MINIMUM AND 0.755 INCHES UM" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD" |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROLLED FOR POLARIS" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | III OVERALL LENGTH | 1.035 INCHES MINIMUM AND 1.065 INCHES UM" |
| ABJT | TERMINAL LENGTH | 6.000 INCHES NOMINAL" |
| ABKW | III OVERALL HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| ABMK | III OVERALL WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES UM" |
| ABXF | SHAFT LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES UM" |
| ADAQ | BODY LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES UM" |
| ADAT | BODY WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ADAU | BODY HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BEARING" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.745 INCHES MINIMUM AND 0.755 INCHES UM" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD" |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROLLED FOR POLARIS" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
