To receive competitive purchasing options on part number 26-MIL by Caro Inc, look no further than NSN Direct. For your reference, this item has the NSN 3416-01-034-1257 and is listed with the description “Lathe Engine.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Caro Inc parts produced under the CAGE Code 55985, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 26-MIL, you can glean from the first four digits of its NSN 3416-01-034-1257 that it belongs to the FSC 3416 Lathes. This being said, do not hesitate to request quotes on part number 26-MIL and any other NSN parts that we feature to experience unrivaled procurement.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAXX | MOUNTING TYPE | BENCH OR FLOOR |
| ADQR | CENTER TO CENTER DISTANCE | 30.000 INCHES NOMINAL |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTD | RATED SWING | 25.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 25.000 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 3.000 INCHES MINIMUM |
| FREQ | FREQUENCY IN HERTZ | 50.0 AND 60.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 STOP,CARRIAGE,MICROMETER,1 STOP,THREAD CUTTING,1 INDICATOR,THREAD,1 TAPER ATTACHMENT,1 SET GEARS,1BAG,1 COVER,CANVAS,1 SET WRENCHES,1 WRENCH SPANNER,1 WRENCH,TOOL POST,1 ADAPTER HEADSTOCK,1 ADAPTER,TAILSTOCK,1 CHUCK,3-JAW UNIVERSAL,1 CHUCK4 JAW INDEPENDENT,1 CHUCK,COLLET,1 SET COLLETS,1 CHUCK DRILL,1 FACEPLATE,12 INCH DIAMETER,1 FACEPLATE,24 INCH DIAMETER,2 LATHE CENTERS,1 SET DOG LATHE,1 DOG LATHE,1 STEADYREST,3 SOCKETS,TAPER SHANK TOOL,1 SET DRIFT,DRILL,1 SET TOOL POST,LATHE,1 KNURLING TOOL,2 HOLDERS,3/8 INCH SQUARECUTTER BIT RIGHT AND LEFT HAND TURNING,2 HOLDERS,1/8 X 7/8 INCH CUT-OFF BLADE,RIGHT AND LEFT HAND OFFSET,1 HOLDER,BORING BAR,1 BORING BAR,ROUND,1/2 INCH DIAMETER,1 BORING BAR ROUND,3/4 INCH DIAMETER,1 BORING BAR,ROUND,1-1/8 INCH DIAMETER,3 KNURLING SETS |
| AWHA | BED TYPE | SOLID |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.000 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| FAAZ | PHASE | THREE |
| BTTB | SPINDLE SPEED RANGE IN RPM | +30.0/+1200.0 |
| BTTG | SWING OVER CROSS SLIDE | 18.000 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
