To receive competitive purchasing options on part number WS9030-15LH by Carroll Engineering Co, look no further than NSN Direct. For your reference, this item has the NSN 3020-00-823-5081 and is listed with the description “Gear Bevel.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Carroll Engineering Co parts produced under the CAGE Code 11708, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number WS9030-15LH, you can glean from the first four digits of its NSN 3020-00-823-5081 that it belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. This being said, do not hesitate to request quotes on part number WS9030-15LH and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-823-5081 Item PartTypeName: GEAR,BEVEL | 3020 | 008235081 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WD5018 | 2 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGJS | PITCH DIAMETER | 7.7200 INCHES NOMINAL |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 56.0 ROCKWELL C MINIMUM OVERALL AND 61.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.769 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.335 INCHES |
| CWNM | TOOTH DIRECTION | LEFT |
| CWQD | PITCH ANGLE | 74.0500 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES SECOND END |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.106 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.500 INCHES BOTH ENDS |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY N0.4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY LH |
| AAQL | BODY STYLE | PLAIN,SOLID |
| AJLA | TEETH QUANTITY | 42 |
| CWMW | TEETH TYPE | SPIRAL |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.502 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.308 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 3.313 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 3.500 INCHES SECOND END |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,FRONT HUB RECESSED,BACK HUB PROTRUDING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
