To receive competitive purchasing options on part number ST4M152-4A4GK by Dixie Aerospace Llc, look no further than NSN Direct. For your reference, this item has the NSN 3110-00-369-1280 and is listed with the description “Bearing Roller Rod End.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Dixie Aerospace Llc parts produced under the CAGE Code 0FWK8, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number ST4M152-4A4GK, you can glean from the first four digits of its NSN 3110-00-369-1280 that it belongs to the FSC 3110 Bearings Antifriction Unmounted. This being said, do not hesitate to request quotes on part number ST4M152-4A4GK and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-369-1280 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 003691280 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST4M152-4A4GK | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.2500 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 1.7800 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.8000 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 0.7500 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3950 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CBBL | FEATURES PROVIDED | ALIGNING RING |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | SUPP |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | NAS513 KEYWAY IN SHANK AND RED NYLON LUBRICATOR FITTING |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC SEAL |
| MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8620 ROD END BODY |
| MATT | MATERIAL | STEEL COMP 430 SHIELD |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| SUPP | SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS TOLERANCE,HEAT TREATMENT,SURFACE FINISH,OR MATERIAL TYPE AND SPECIAL INSP. REQS SUCH AS MAGNETIC |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
