To receive competitive purchasing options on part number 1C000125-01 by Eaton Hydraulics Llc, look no further than NSN Direct. For your reference, this item has the NSN 4720-01-418-2130 and is listed with the description “Hose Assembly Nonmetallic.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Eaton Hydraulics Llc parts produced under the CAGE Code 45X75, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 1C000125-01, you can glean from the first four digits of its NSN 4720-01-418-2130 that it belongs to the FSC 4720 Hose and Tubing Flexible. This being said, do not hesitate to request quotes on part number 1C000125-01 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-418-2130 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014182130 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1C02865MMN0330A | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.030 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.188 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.062 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM 1ST END |
| AFQN | FLANGE LENGTH | 3.090 INCHES MINIMUM AND 3.160 INCHES MAXIMUM 2ND END |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683 |
| AGFF | FLANGE WIDTH | 2.220 INCHES NOMINAL 1ST END |
| AGFF | FLANGE WIDTH | 2.780 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 33.000 INCHES NOMINAL OVERALL |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
