To receive competitive purchasing options on part number 954078-1 by Encore Interiors Inc, look no further than NSN Direct. For your reference, this item has the NSN 5315-01-471-8095 and is listed with the description “Pin Shoulder Headless.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Encore Interiors Inc parts produced under the CAGE Code 1P175, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 954078-1, you can glean from the first four digits of its NSN 5315-01-471-8095 that it belongs to the FSC 5315 Nails Machine Keys and Pins. This being said, do not hesitate to request quotes on part number 954078-1 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-471-8095 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 014718095 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 954078-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.435 INCHES NOMINAL |
| AATR | SHANK LENGTH | 0.429 INCHES NOMINAL |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.116 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.415 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.001 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | C-17A |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AMFM | SECOND END TAPER LENGTH | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| CQTR | SECOND SHANK DIAMETER | 0.368 INCHES MINIMUM AND 0.372 INCHES MAXIMUM |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CTHC | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| CWAS | SECOND SHANK LENGTH | 1.500 INCHES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, ALIGNMENT |
| FEAT | SPECIAL FEATURES | SHOULDER OF THE ITEM IS LOCATED 0.10 INCH BELOW THE GROOVE. |
| MATT | MATERIAL | STEEL COMP 304 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, COMP 304 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | UNDERCUT |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
