To receive competitive purchasing options on part number 910041 by Euclid Inc, look no further than NSN Direct. For your reference, this item has the NSN 2520-00-826-5030 and is listed with the description “Shaft Axle Automotive.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Euclid Inc parts produced under the CAGE Code 30379, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 910041, you can glean from the first four digits of its NSN 2520-00-826-5030 that it belongs to the FSC 2520 Vehicle Power Transmission Components. This being said, do not hesitate to request quotes on part number 910041 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-826-5030 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 008265030 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9210041 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AMDM | FIRST END SPLINE LENGTH | 2.750 INCHES NOMINAL |
| BBCF | SECOND END SPLINE QUANTITY | 18 |
| BNPJ | FIRST END FACILITY DIAMETER | 2.205 INCHES NOMINAL |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNYX | FIRST END SPLINE TYPE | INVOLUTE |
| ABHP | OVERALL LENGTH | 52.750 INCHES NOMINAL |
| AMDS | FIRST END PITCH DIAMETER | 2.250 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 2.380 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 2.250 INCHES NOMINAL |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 18 |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTC | FIRST END FACILITY WIDTH | 0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| BNTD | FIRST END FACILITY LOCATION | 0.620 IN. FROM SHAFT END |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYY | FIRST END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 10024,EUCLID DIV,GENERAL MOTORS CORP MFR REF SINGLE MATERIAL RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
