To receive competitive purchasing options on part number MILL23400 by Federal Specifications, look no further than NSN Direct. For your reference, this item has the NSN 3416-00-517-1051 and is listed with the description “Lathe Engine.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Federal Specifications parts produced under the CAGE Code 81348, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number MILL23400, you can glean from the first four digits of its NSN 3416-00-517-1051 that it belongs to the FSC 3416 Lathes. This being said, do not hesitate to request quotes on part number MILL23400 and any other NSN parts that we feature to experience unrivaled procurement.
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 16 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 28.0 TO 1000.0 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.0 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 BELT SET,COMPLETE; 1 CENTER,HALF; 1 CENTER,HEADSTOCK; 1 CENTER,TAILSTOCK; CHUCK,DRILL,1/2 IN. CAPACITY; 1 CHUCK,SPINDLE NOSE,LATHE; 1 CHUCK,3 JAW,UNIVERSAL,6 IN.; 1 CHUCK,4 JAW,INDEPENDENT 8 IN.; 1 COLLECT SET,1/16 IN. TO 1-3/8 IN. RANGE,11 COLLECTS; 1 COOLANT SYSTEM,MOTOR DRIVEN; 1 DOG SET,BENT,1 IN.,2 IN.,3 IN.,4 IN. SIZES; 1 HOLDER,TOOL,KNURLING ARMSTRONG NO. 1K; 1 HOLDER,TOOL,BORING ARMSTRONG NO. 9; 1 HOLDER,TOOL,CUT-OFF ARMSTRONG NO. 31-L; 1 HOLDER,TOOL,CUT-OFF ARMSTRONG NO. 31-R; 1 HOLDER,TOOL,TURNING ARMSTRONG NO. 1R; 1HOLDER,TOOL,TURNING ARMSTRONG NO. 1-L; 1 MANDREL SET,LATHE; 1 MOTOR,5 HP,220/440V,60 CYCLES,3 PHASE,1800 RPM; 1 REST,FOLLOW; 1 STARTER,NON-REVERSING,MAGNETIC; 1 SWITCH,PUSH,REMOE CONTROL; 1 TAPER ATTACHMENT,TELESCOPIC |
| ACDC | CURRENT TYPE | AC |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 14 SIZE |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYW | GEAR CHANGE TYPE | QUICK |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 80.0 PER INCH |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 00L127 |
| AWHA | BED TYPE | SOLID |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| FAAZ | PHASE | THREE |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| SR-1 | MANUFACTURERS CODE | 81348 |
| SR-1 | MANUFACTURERS CODE | 81349 |
| APGF | DESIGN TYPE | SCREW |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILL23400 |
| BTTD | RATED SWING | 14.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 14.000 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 9.000 INCHES NOMINAL |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 3 ASA STANDARD |
| AAXX | MOUNTING TYPE | FLOOR |
| ADQR | CENTER TO CENTER DISTANCE | 30.000 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.406 INCHES NOMINAL |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
