To receive competitive purchasing options on part number 9188077 by G And G Electronics, look no further than NSN Direct. For your reference, this item has the NSN 5340-00-789-0808 and is listed with the description “Bracket Double Angle.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other G And G Electronics parts produced under the CAGE Code 3D955, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 9188077, you can glean from the first four digits of its NSN 5340-00-789-0808 that it belongs to the FSC 5340 Hardware Commercial. This being said, do not hesitate to request quotes on part number 9188077 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-789-0808 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 007890808 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9188077 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD (NON-CORE) | STAMPED |
| ADLK | FIRST LEG LENGTH | 0.602 INCHES MINIMUM AND 0.642 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.268 INCHES MINIMUM AND 0.271 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.225 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AHLZ | SECOND LEG SLOT LENGTH | 0.350 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AHMA | SECOND LEG SLOT WIDTH | 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AHPZ | CENTER SECTION HEIGHT | 3.010 INCHES MINIMUM AND 3.050 INCHES MAXIMUM |
| AHQA | CENTER SECTION WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | FURNISHED WITH ONE NUT,SELF-LOCKING AND ONE RUBBER STRIP |
| HEAT | HEAT TREATMENT | H-14 STRAIN HARDENED,1/2 HARD |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
| AHPW | FIRST LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AHQB | CENTER SECTION THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
