To receive competitive purchasing options on part number VCDX15-6N2 by General Dynamics Global Imaging, look no further than NSN Direct. For your reference, this item has the NSN 5990-00-135-6180 and is listed with the description “Synchro Differential Transmitter.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other General Dynamics Global Imaging parts produced under the CAGE Code 10112, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number VCDX15-6N2, you can glean from the first four digits of its NSN 5990-00-135-6180 that it belongs to the FSC 5990 Synchros and Resolvers. This being said, do not hesitate to request quotes on part number VCDX15-6N2 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-135-6180 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER | 5990 | 001356180 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MILS20708-22 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.2220 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.4367 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1867 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 38.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 500.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 2050.00 MINIMUM AND 2600.00 MINIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 77.00 MINIMUM AND 83.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 900.00 MINIMUM AND 1200.00 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 11.00 MINIMUM AND 17.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 60.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.070 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.6820 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/22 GOVERNMENT SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
