To receive competitive purchasing options on part number 11RC41 by General Dynamics Global Imaging, look no further than NSN Direct. For your reference, this item has the NSN 5990-00-501-2097 and is listed with the description “Resolver Electrical.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other General Dynamics Global Imaging parts produced under the CAGE Code 10112, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 11RC41, you can glean from the first four digits of its NSN 5990-00-501-2097 that it belongs to the FSC 5990 Synchros and Resolvers. This being said, do not hesitate to request quotes on part number 11RC41 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-501-2097 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 005012097 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 577R708H10 | 5 | 8 | E |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9682 INCHES MINIMUM AND 0.9687 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.1200 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0560 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9500 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0930 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1050 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7930 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 22.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 160.0 MILLIWATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 580.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 370.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 415.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 225.00 NOMINAL |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.08 NOMINAL |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJTY | ZCO RESISTANCE IN OHMS | 370.00 NOMINAL |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.080 ROTOR TO COMPENSATOR NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 14.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MINIMUM AND 2.2000 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 1630.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 1400.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| CSPK | PLUS J ZCO REACTANCE IN OHMS | 1400.00 NOMINAL |
| CTJK | SHAFT FLATTED PORTION THICKNESS | 0.1050 INCHES NOMINAL SINGLE SHAFT |
| CWFM | SHAFT FLATTED PORTION LENGTH | 0.6730 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
