To receive competitive purchasing options on part number VRP11-4D9-50 by General Dynamics Global Imaging, look no further than NSN Direct. For your reference, this item has the NSN 5990-00-967-3793 and is listed with the description “Resolver Electrical.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other General Dynamics Global Imaging parts produced under the CAGE Code 10112, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number VRP11-4D9-50, you can glean from the first four digits of its NSN 5990-00-967-3793 that it belongs to the FSC 5990 Synchros and Resolvers. This being said, do not hesitate to request quotes on part number VRP11-4D9-50 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-967-3793 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 009673793 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 512-104-903-4 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.4200 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0610 INCHES MINIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9995 INCHES MINIMUM |
| ABPC | UNDERCUT WIDTH | 0.0470 INCHES MINIMUM AND 0.0530 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1873 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3900 INCHES MINIMUM SINGLE SHAFT AND 0.4200 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 605.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 400.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 300.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 250.00 NOMINAL |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 440.00 NOMINAL |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.000 ROTOR TO COMPENSATOR NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0/5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.33 INCH-OUNCES MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.11 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWR | SHOULDER LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0000 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 220.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 2000.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.4045 INCHES MINIMUM AND 0.4075 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
