To receive competitive purchasing options on part number 3C3608G02 by General Electric Company, look no further than NSN Direct. For your reference, this item has the NSN 4920-01-443-8012 and is listed with the description “Fixture Machining A.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other General Electric Company parts produced under the CAGE Code 07482, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 3C3608G02, you can glean from the first four digits of its NSN 4920-01-443-8012 that it belongs to the FSC 4920 Aircraft Maintenance And Repair Shop Specialized Equipment. This being said, do not hesitate to request quotes on part number 3C3608G02 and any other NSN parts that we feature to experience unrivaled procurement.
| MRC | Criteria | Characteristic |
|---|---|---|
| CZDH | NOMINAL OVERALL DIAMETER | 21.000 INCHES |
| AGAV | III END ITEM IDENTIFICATION | F118-GE-100 ACFT ENG AGE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FIXTURE, MACHINE-INSPECTION AIR SEAL PRESSURE TURBINE FWD |
| RDAL | REFERENCE DATA AND LITERATURE | SERD NO. 6046 |
| SR-5 | THE MANUFACTURERS DATA | |
| SR-5 | MANUFACTURERS CODE | 07482 |
| FEAT | SPECIAL FEATURES | C/O RING OF ALLOY STEEL; 2 RABBETS ARE MACHINED ON INSIDE OF THIS RING TO PROVIDE A TIGHT FIT ON THE OUTSIDE OF THE SEAL HOUSING. THE LOWER SIDE HAS BEEN MACHINED ON A 16.380 I.D. BY 0.900 D. TO LOCAATE THE STRIPPER RING. THE STRIPPER RING IS 16.250 O.D. BY 13.250 I.D. BY 0.500 THK. AND IS TAPPED IN 6 LOCATIONS FOR 0.375 UNC BOLTS. THE FIXTURE RING IS DRILLED AND TAPPED IN 18 LOCATIONS FOR 0.375 BY 16.000 UNC BOLTS WHICH ATTACH THE 6 CLAMP PADS AND 6 SUPPORT BLOCKS. THE CLAMP PADS AND SUPPORT BLOCKS ARE USED FOR RETAINING THE SEAL IN THE FIXTURE DURING MACHING AND INSPECTION OPERATIONS; MFGR NOUN: FIXTURE,MACHINING |
| SR-5 | DESIGN CONTROL REFERENCE | 3C3608G02 |
| FTLD | FUNCTIONAL DESCRIPTION | USED TO REMOVE/REPLACE THE LPT FORWARD ROTATING AIR SEAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
