To receive competitive purchasing options on part number 3882893 by General Motors Corp, look no further than NSN Direct. For your reference, this item has the NSN 3020-00-852-5187 and is listed with the description “Gear Helical.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other General Motors Corp parts produced under the CAGE Code 7X677, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 3882893, you can glean from the first four digits of its NSN 3020-00-852-5187 that it belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. This being said, do not hesitate to request quotes on part number 3882893 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-852-5187 Item PartTypeName: GEAR,HELICAL | 3020 | 008525187 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| T2526 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGJS | PITCH DIAMETER | 5.8848 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 54 |
| CQFM | HARDNESS RATING | 75.0 BRINELL STANDARD MINIMUM OVERALL AND 95.0 BRINELL STANDARD MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.015 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.078 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.875 INCHES |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.741 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| AAQL | BODY STYLE | SPOKED,OFFSET |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPZ | HELIX ANGLE | 23.9196 DEGREES |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.098 INCHES SECOND END |
| CWRS | BORE NOMINAL DIAMETER | 1.278 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.188 INCHES BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.563 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | LETTER O STAMPED BETWEEN TEETH ON FACE OF GEAR SIDE 76 DEG 17 MIN CW FROM CENTER LINE OF KEYWAY,TWO PULLER HOLES |
| MATT | MATERIAL | ALUMINUM ALLOY OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE RECESSED HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
