To receive competitive purchasing options on part number 88P914 LR1EL by General Motors Corp, look no further than NSN Direct. For your reference, this item has the NSN 3110-01-173-3724 and is listed with the description “Bearing Fan And Water Pump.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other General Motors Corp parts produced under the CAGE Code 43334, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 88P914 LR1EL, you can glean from the first four digits of its NSN 3110-01-173-3724 that it belongs to the FSC 3110 Bearings Antifriction Unmounted. This being said, do not hesitate to request quotes on part number 88P914 LR1EL and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-173-3724 Item PartTypeName: BEARING,FAN AND WATER PUMP | 3110 | 011733724 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 88P914 LR1EL | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABHP | OVERALL LENGTH | 5.8420 INCHES MINIMUM AND 5.8720 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGWB | SHORT END SHAFT LENGTH | 1.0940 INCHES MINIMUM AND 1.1240 INCHES MAXIMUM |
| AGWC | LONG END SHAFT LENGTH | 1.9630 INCHES MINIMUM AND 2.0330 INCHES MAXIMUM |
| AGWD | SHORT END SHAFT DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AGWE | LONG END SHAFT DIAMETER | 0.6262 INCHES MINIMUM AND 0.6267 INCHES MAXIMUM |
| AGYF | RETAINER FABRICATION METHOD | MOLDED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| AKVV | INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| FEAT | SPECIAL FEATURES | SHORT SHAFT END TAPERED 1.5000 IN. PER FT AND INTERNALLY THREAD WITH A 1.0000 IN. MIN THD LG; 7 GM MIN,8 GM MAX OF NLG13 GREASE OR 45 PCT FULL OF GM9985371 GREASE; PRESSED FABRICATION METHOD IF STEEL RETAINER |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | NLG13,FSCM 10988 MFR REF SINGLE MATERIAL RESPONSE OR 9985371,FSCM 24617 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE RETAINER OR STEEL RETAINER |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL SHAFT |
| STYL | STYLE DESIGNATOR | FAN AND WATER PUMP BALL TYPE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
