To receive competitive purchasing options on part number 584134 by Heligear Acquisition Co, look no further than NSN Direct. For your reference, this item has the NSN 3040-00-083-4104 and is listed with the description “Gearshaft Bevel.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Heligear Acquisition Co parts produced under the CAGE Code 22907, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 584134, you can glean from the first four digits of its NSN 3040-00-083-4104 that it belongs to the FSC 3040 Miscellaneous Power Transmission Equipment. This being said, do not hesitate to request quotes on part number 584134 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-083-4104 Item PartTypeName: GEARSHAFT,BEVEL | 3040 | 000834104 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 584134 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 3.750 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 3.750 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 18 |
| AJWS | GEAR OUTSIDE DIAMETER | 1.418 INCHES NOMINAL |
| ANJS | SHAFT END TYPE | SPLINED INVOLUTE,INTERNAL |
| AQGH | DIAMETRAL PITCH | 14 |
| AQPL | FACE WIDTH | 0.250 INCHES NOMINAL |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 38.0500 DEGREES |
| CYEQ | SHAFT MATERIAL | STEEL |
| CYER | GEAR MATERIAL | STEEL |
| CYES | HARDNESS RATING AND LOCATION | 32.0 ROCKWELL C MINIMUM SHAFT AND 42.0 ROCKWELL C MAXIMUM SHAFT |
| CYET | SHAFT LARGEST DIAMETER | 0.870 INCHES NOMINAL |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| CYEV | LONGER SHAFT SEGMENT LENGTH | 1.945 INCHES NOMINAL |
| CYEW | SHAFT END SIZE | 0.669 INCHES |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
