To receive competitive purchasing options on part number TX1027D4-18A by Hi Shear Corporation, look no further than NSN Direct. For your reference, this item has the NSN 5305-01-481-9432 and is listed with the description “Screw Close Tolerance.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Hi Shear Corporation parts produced under the CAGE Code 73197, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number TX1027D4-18A, you can glean from the first four digits of its NSN 5305-01-481-9432 that it belongs to the FSC 5305 Screws. This being said, do not hesitate to request quotes on part number TX1027D4-18A and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-481-9432 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 014819432 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1027D4-18A | 3 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAVA | POINT DIAMETER | 0.425 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ANEE | GRIP LENGTH | 1.125 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| AAJD | THREAD CLASS | 3A |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL | HEAD DIAMETER | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | PYLON,AIRCRAFT(F/A-18E, F/A-18F) |
| CQBC | MINIMUM TENSILE STRENGTH | 4400 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| AAUR | GRIP DIAMETER | 0.249 INCHES MINIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH |
| AASB | FASTENER LENGTH | 1.550 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ABQJ | POINT STYLE | FLAT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
