To receive competitive purchasing options on part number 977404 by Honeywell International Inc, look no further than NSN Direct. For your reference, this item has the NSN 3110-01-501-5109 and is listed with the description “Plate Retaining Bearing.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Honeywell International Inc parts produced under the CAGE Code 99193, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 977404, you can glean from the first four digits of its NSN 3110-01-501-5109 that it belongs to the FSC 3110 Bearings Antifriction Unmounted. This being said, do not hesitate to request quotes on part number 977404 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-501-5109 Item PartTypeName: PLATE,RETAINING,BEARING | 3110 | 015015109 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 977404 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | FLAT W/APERTURE" |
| ABGL | WIDTH | 1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM" |
| ABRY | LENGTH | 2.412 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.233 INCHES MAXIMUM" |
| ABVL | APERTURE DIAMETER | 1.660 INCHES MINIMUM AND 1.680 INCHES MAXIMUM" |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | HORIZONTAL CENTERLINE" |
| ADNU | CORNER RADIUS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM" |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | 2.072 INCHES NOMINAL" |
| ADUM | OVERALL THICKNESS | 0.016 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | RETAINER,BEARING;GAS GENERATOR AND ACCESSORY DRIVE ASSEMBLY;AIRCRAFT A-10 THUNDERBOLT" |
| CWHW | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.036 INCHES NOMINAL" |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED" |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 1,TY II FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | DIAMOND" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | FLAT W/APERTURE" |
| ABGL | WIDTH | 1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM" |
| ABRY | LENGTH | 2.412 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.233 INCHES MAXIMUM" |
| ABVL | APERTURE DIAMETER | 1.660 INCHES MINIMUM AND 1.680 INCHES MAXIMUM" |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | HORIZONTAL CENTERLINE" |
| ADNU | CORNER RADIUS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM" |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | 2.072 INCHES NOMINAL" |
| ADUM | OVERALL THICKNESS | 0.016 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | RETAINER,BEARING;GAS GENERATOR AND ACCESSORY DRIVE ASSEMBLY;AIRCRAFT A-10 THUNDERBOLT" |
| CWHW | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.036 INCHES NOMINAL" |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED" |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 1,TY II FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | DIAMOND" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
