To receive competitive purchasing options on part number H330044P01 by Howden Fluid Systems, look no further than NSN Direct. For your reference, this item has the NSN 4320-01-176-2043 and is listed with the description “Sleeve Shaft Pump.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Howden Fluid Systems parts produced under the CAGE Code 33654, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number H330044P01, you can glean from the first four digits of its NSN 4320-01-176-2043 that it belongs to the FSC 4320 Power And Hand Pumps. This being said, do not hesitate to request quotes on part number H330044P01 and any other NSN parts that we feature to experience unrivaled procurement.
MRC | Criteria | Characteristic |
---|---|---|
SFTT | SURFACE TREATMENT | ANODIZE INSIDE DIAMETER SURFACE OF BODY CHROMATE LEFT END SURFACE OF BODY AND FLANGE CHROMATE RIGHT END SURFACE OF BODY |
SR-5 | MANUFACTURERS CODE | 58163 |
ADAS | BODY INSIDE DIAMETER | 0.8000 INCHES MINIMUM AND 0.8020 INCHES MAXIMUM |
CSYT | (NON-CORE DATA) CHAMFER ANGLE | 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL |
AAZP | (NON-CORE DATA) CHAMFER LENGTH | 0.0250 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM 0.0570 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM |
AGFF | FLANGE WIDTH | 0.2300 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM |
MATT | MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC ALL MATERIAL RESPONSES OVERALL |
STYL | STYLE DESIGNATOR | SOLID |
AGAV | III END ITEM IDENTIFICATION | F-16 ACFT |
AEPR | FLANGE OUTSIDE DIAMETER | 1.0600 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM |
BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER CHAMFERED OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER ROUND LEFT FLANGE OUTSIDE RIGHT CORNER ROUND LEFT FLANGE BODY CORNER |
ABGG | (NON-CORE DATA) RADIUS | 0.0600 INCHES NOMINAL 0.0600 INCHES NOMINAL |
SR-5 | THE MANUFACTURERS DATA | |
SR-5 | DESIGN CONTROL REFERENCE | H330044P01 |
FEAT | SPECIAL FEATURES | ONE GROVE 0.210 IN. W BY 0.055 IN. DP 0.750 IN. FROM 1ST END,0.020 IN. RADIUS GROVE BOTTOM CORNERS; TWELVE EQUALLY SPACED 0.035 IN. W BY 0.094 IN. DP SLOTS ON 1ST END FACE |
ABHP | OVERALL LENGTH | 2.1870 INCHES NOMINAL |
ADAR | BODY OUTSIDE DIAMETER | 1.0500 INCHES MINIMUM AND 1.0510 INCHES MAXIMUM |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 3 CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY MIL-A-8625,TYPE 1 CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE MIL-A-8625,TYPE 1 CLASS 1 MIL SPEC 3RD TREATMENT RESPONSE RIGHT END SURFACE OF BODY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote