To receive competitive purchasing options on part number 7108155-4 by Illinois Tool Works Inc, look no further than NSN Direct. For your reference, this item has the NSN 3020-01-494-4274 and is listed with the description “Gear Helical.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Illinois Tool Works Inc parts produced under the CAGE Code 5G804, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 7108155-4, you can glean from the first four digits of its NSN 3020-01-494-4274 that it belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. This being said, do not hesitate to request quotes on part number 7108155-4 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-494-4274 Item PartTypeName: GEAR,HELICAL | 3020 | 014944274 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7108115-4 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| ABSA | SPLINE QUANTITY | 32 BOTH ENDS |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGAV | END ITEM IDENTIFICATION | GEARBOX,RAMMER DRIVE |
| AGJS | PITCH DIAMETER | 6.1900 INCHES MINIMUM AND 6.2100 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 67 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 2.0000 INCHES NOMINAL BOTH ENDS |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH FLANGE |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.0000 INCHES |
| CWMW | TEETH TYPE | SPIRAL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 10.0000 DEGREES AND 25.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.458 INCHES BETWEEN BODY AND FLANGE |
| CWRM | FACE NOMINAL WIDTH | 1.4000 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.0500 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.500 INCHES BOTH ENDS |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.350 INCHES AXIALLY THROUGH FLANGE |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 4.500 INCHES AXIALLY THROUGH FLANGE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE,RH |
| FEAT | SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1;MATES WITH P/N H832-1662-3 (NSN 3040-01-494-3543) AND -16 (CAGE 96169);MATCHED PAIR H832-1662-3 & 4 NSN 3020-01-494-0562;NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053;USED ON NSSN CLASS SUBMARINE |
| MATT | III MATERIAL | STEEL COMP E9310 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669/1 GR-9310 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
