To receive competitive purchasing options on part number 6534D436-1 by Indal Technologies Inc, look no further than NSN Direct. For your reference, this item has the NSN 3020-01-184-9503 and is listed with the description “Gear Helical.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Indal Technologies Inc parts produced under the CAGE Code 36334, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 6534D436-1, you can glean from the first four digits of its NSN 3020-01-184-9503 that it belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. This being said, do not hesitate to request quotes on part number 6534D436-1 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-184-9503 Item PartTypeName: GEAR,HELICAL | 3020 | 011849503 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 6534D436-1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSA | SPLINE QUANTITY | 11 SECOND END |
| AGJS | PITCH DIAMETER | 3.5000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 16 |
| ANTP | BORE STYLE | INVOLUTE SPLINE SECOND END |
| ANTP | BORE STYLE | W/STEPPED COUNTERBORE COUNTERBORE,FIRST END |
| BDTX | SPLINE PITCH DIAMETER | 1.8333 INCHES NOMINAL SECOND END |
| CQFM | HARDNESS RATING | 31.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| CQFM | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.900 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 23.9497 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.250 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.810 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 3.690 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.060 INCHES COUNTERBORE,FIRST END |
| CWRS | BORE NOMINAL DIAMETER | 2.125 INCHES SECOND END |
| CWTB | COUNTERBORE NOMINAL DEPTH | 1.130 INCHES FIRST COUNTERBORE,SECOND END |
| CWTB | COUNTERBORE NOMINAL DEPTH | 2.369 INCHES SECOND COUNTERBORE,SECOND END |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 1.682 INCHES SECOND COUNTERBORE,SECOND END |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 2.130 INCHES FIRST COUNTERBORE,SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.954 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.620 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 2.938 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 1.010 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.954 INCHES FIRST END |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.180 INCHES SECOND END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 2.906 INCHES SECOND END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 1.070 INCHES SECOND END |
| MATT | MATERIAL | STEEL COMP 4340 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | COPPER SPLINE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-14550 CLASS 3 MFR REF SINGLE TREATMENT RESPONSE SPLINE |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
