To receive competitive purchasing options on part number 901860-2C by Kaydon Ring And Seal Inc, look no further than NSN Direct. For your reference, this item has the NSN 3110-01-191-7541 and is listed with the description “Bearing Ball Duplex.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Kaydon Ring And Seal Inc parts produced under the CAGE Code 32828, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 901860-2C, you can glean from the first four digits of its NSN 3110-01-191-7541 that it belongs to the FSC 3110 Bearings Antifriction Unmounted. This being said, do not hesitate to request quotes on part number 901860-2C and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-191-7541 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011917541 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| U495 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.6050 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 4.4997 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 5.1246 INCHES MINIMUM AND 5.1250 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| CTHQ | BEARING PRELOAD RATING | 20.0 POUNDS MINIMUM AND 30.0 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | VACUUM IMPREGNATED RETAINER WITH SPECIFIED OIL,CENTRIFUGE FOR 2 MINUTES AT 100 G AFTER VACUUM; INSCRIBE MATCH MARK ON OD OF EACH BEARING; 1 SHIELD EACH BEARING |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | COTTON RETAINER AND PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
| ZZZK | SPECIFICATION/STANDARD DATA | 82577-801860 MANUFACTURERS STANDARD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
