To receive competitive purchasing options on part number 517298 by L3 Technologies Inc, look no further than NSN Direct. For your reference, this item has the NSN 3020-00-752-1264 and is listed with the description “Gear Bevel.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other L3 Technologies Inc parts produced under the CAGE Code 02978, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 517298, you can glean from the first four digits of its NSN 3020-00-752-1264 that it belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. This being said, do not hesitate to request quotes on part number 517298 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-752-1264 Item PartTypeName: GEAR,BEVEL | 3020 | 007521264 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 517298 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 3.1250 INCHES NOMINAL |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM BODY AND 34.0 ROCKWELL C MAXIMUM BODY |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.2356 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 49.9698 DEGREES |
| CWRS | BORE NOMINAL DIAMETER | 1.335 INCHES BOTH ENDS |
| CWRX | BORE NOMINAL DEPTH | 2.375 INCHES BOTH ENDS |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.687 INCHES FIRST END |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 1.210 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.622 INCHES FIRST END |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.180 INCHES FIRST END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 1.440 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | SPLINE MINOR DIA 1.210 IN. NOM; TOOTH PRESSURE ANGLE 30.0 DEG |
| ABSA | SPLINE QUANTITY | 25 BOTH ENDS |
| AJLA | TEETH QUANTITY | 25 |
| BDTX | SPLINE PITCH DIAMETER | 1.2500 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM TEETH AND 62.0 ROCKWELL C MAXIMUM TEETH |
| CWFR | NOMINAL OVERALL LENGTH | 2.375 INCHES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.960 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.620 INCHES |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.812 INCHES BOTH ENDS |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 1.210 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048 FS 8615,FS 8620,FS 8720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,BACK HUB PROTRUDING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
