To receive competitive purchasing options on part number 750376 by Lockheed Martin Corporation, look no further than NSN Direct. For your reference, this item has the NSN 3110-00-657-2597 and is listed with the description “Bearing Roller Rod End.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Lockheed Martin Corporation parts produced under the CAGE Code 98897, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 750376, you can glean from the first four digits of its NSN 3110-00-657-2597 that it belongs to the FSC 3110 Bearings Antifriction Unmounted. This being said, do not hesitate to request quotes on part number 750376 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-657-2597 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 006572597 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A-44150 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.4375 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.9300 INCHES MINIMUM AND 2.9900 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.3000 INCHES MINIMUM AND 1.3520 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F-104 STARFIGHTER ACFT |
| AGGY | SHANK THREAD LENGTH | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3250 INCHES MINIMUM AND 0.3400 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.3050 INCHES MINIMUM AND 2.3350 INCHES MAXIMUM |
| AGYF | RETAINER FABRICATION METHOD | STAMPED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.437 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 0.10 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | DIFFERENTIATED BY 0.0701 IN. HOLE CENTERED ON FLAT OF SHANK 0.640 IN. FROM CENTER OF BORE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DC44,DOW CORNING CORP MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP E52100 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
