To receive competitive purchasing options on part number 28795A by Lull Lift Corp, look no further than NSN Direct. For your reference, this item has the NSN 4720-01-345-5644 and is listed with the description “Hose Assembly Nonmetallic.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Lull Lift Corp parts produced under the CAGE Code 05331, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 28795A, you can glean from the first four digits of its NSN 4720-01-345-5644 that it belongs to the FSC 4720 Hose and Tubing Flexible. This being said, do not hesitate to request quotes on part number 28795A and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-345-5644 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013455644 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 28795A | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ABKV | OUTSIDE DIAMETER | 1.160 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| CQBD | BURST TEST PRESSURE | 12400.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 3100.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRXX | MEASURING METHOD AND LENGTH | 37.000 INCHES NOMINAL OVERALL |
| AAJD | THREAD CLASS | 3B 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CBBL | FEATURES PROVIDED | NONSKIVE |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AGAV | END ITEM IDENTIFICATION | 3930-01-305-2111,MDL. M10K |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| FEAT | SPECIAL FEATURES | PERMANENTLY ATTACHED FITTINGS |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER RUBBER IMPREGNATED BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER RUBBER IMPREGNATED BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| THSD | THREAD SERIES DESIGNATOR | UN 2ND END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
