To receive competitive purchasing options on part number 9019-6.0 by Maritime Tanksystems International, look no further than NSN Direct. For your reference, this item has the NSN 4720-01-431-1355 and is listed with the description “Hose Assembly Nonmetallic.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Maritime Tanksystems International parts produced under the CAGE Code 0W0U5, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 9019-6.0, you can glean from the first four digits of its NSN 4720-01-431-1355 that it belongs to the FSC 4720 Hose and Tubing Flexible. This being said, do not hesitate to request quotes on part number 9019-6.0 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-431-1355 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014311355 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 78C-6N-6N-20-24 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | Inside Diameter | 1.250 INCHES NOMINAL |
| AGAV | End Item Identification | USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| ABKU | Flange Thickness | 0.405 INCHES NOMINAL 1ST END |
| ABKV | Outside Diameter | 1.960 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CQCS | Layer Composition And Location | 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | Maximum Operating Pressure | 5000.0 POUNDS PER SQUARE INCH |
| AKUT | End Flange Construction | SPLIT 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| ADJS | Exterior Color | RED |
| AKUT | End Flange Construction | SPLIT 2ND END |
| AKUU | End Connection Design | ELBOW 1ST END |
| CRDW | Hydrostatic Test Pressure | 10000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 24.000 INCHES NOMINAL OVERALL |
| ZZZK | Specification/Standard Data | SAE J517, 100R13, 81343 NATIONAL STD/SPEC |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | Connection Type | PLAIN FACE FLANGE 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 1ST END |
| AWLS | Connection Type | PLAIN FACE FLANGE 1ST END |
| ABKU | Flange Thickness | 0.495 INCHES NOMINAL 2ND END |
| AEPR | Flange Outside Diameter | 2.125 INCHES NOMINAL 1ST END |
| ACKH | Minimum Inside Bending Radius | 16.500 INCHES |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD | Burst Test Pressure | 20000.0 POUNDS PER SQUARE INCH |
| CRWL | Inside Surface Condition | SMOOTH |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 2ND END |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQCS | Layer Composition And Location | 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| AEPR | Flange Outside Diameter | 2.500 INCHES NOMINAL 2ND END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 2ND END |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| ADKX | Angle Between Rigid Elbow Fittings In Deg | 270 |
| CQCS | Layer Composition And Location | 6TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
