To receive competitive purchasing options on part number MS21051L3K by National Aerospace Standards Com, look no further than NSN Direct. For your reference, this item has the NSN 5310-00-776-1951 and is listed with the description “Nut Self Locking Plate.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other National Aerospace Standards Com parts produced under the CAGE Code 80205, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number MS21051L3K, you can glean from the first four digits of its NSN 5310-00-776-1951 that it belongs to the FSC 5310 Nuts and Washers. This being said, do not hesitate to request quotes on part number MS21051L3K and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-776-1951 Item PartTypeName: NUT,SELF-LOCKING,PLATE | 5310 | 007761951 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R1000A3K | 1 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| ABTB | MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADEB | PLATE THICKNESS | 0.047 INCHES MAXIMUM |
| ADEC | PLATE WIDTH | 0.308 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWY | COUNTERBORE DIAMETER | 0.194 INCHES MINIMUM NUT |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ACTA | NUT STYLE | PLATE |
| ACVN | NUT LENGTH | 0.950 INCHES MAXIMUM |
| ADEA | NUT HEIGHT | 0.250 INCHES MAXIMUM |
| ADFK | NUT COUNTERBORE DEPTH | 0.062 INCHES MINIMUM NUT |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| AZKQ | TEMP RATING | 450.0 DEG FAHRENHEIT MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
