To receive competitive purchasing options on part number 2860041 by Navair And Navsea Managed, look no further than NSN Direct. For your reference, this item has the NSN 6105-00-243-6575 and is listed with the description “Motor Alternating Current.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Navair And Navsea Managed parts produced under the CAGE Code 10001, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 2860041, you can glean from the first four digits of its NSN 6105-00-243-6575 that it belongs to the FSC 6105 Motors Electrical. This being said, do not hesitate to request quotes on part number 2860041 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-243-6575 Item PartTypeName: MOTOR,ALTERNATING CURRENT | 6105 | 002436575 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2860041 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 6.938 INCHES |
| AAJU | OVERALL LENGTH | 11.281 INCHES |
| AAJV | OVERALL WIDTH | 9.500 INCHES |
| AAUH | SPLINE MINOR DIAMETER | 0.520 INCHES MINIMUM AND 0.529 INCHES MAXIMUM SINGLE END |
| ABPA | UNDERCUT DIAMETER | 0.585 INCHES MINIMUM AND 0.591 INCHES MAXIMUM SINGLE END |
| ABSA | SPLINE QUANTITY | 14 SINGLE END |
| ABWV | SHAFT DIAMETER | 0.616 INCHES MINIMUM AND 0.617 INCHES MAXIMUM SINGLE END |
| AGQL | UNDERCUT LENGTH | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXFH | SPLINE LENGTH | 1.218 INCHES MINIMUM AND 1.278 INCHES MAXIMUM SINGLE END |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFMF | COOLING METHOD | FAN COOLED |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | 1.237 INCHES MINIMUM AND 1.299 INCHES MAXIMUM SINGLE END |
| BKPB | CURRENT RATING METHOD | LOAD AND LOCKED ROTOR |
| BKPH | TORQUE RATING AND TYPE | 1.5 FOOT-POUNDS RUNNING AND 4.8 FOOT-POUNDS STARTING |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | SPLINED AND GROOVED SINGLE END |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | 1.0000 HORSEPOWER OUTPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.781 INCHES SINGLE END |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.594 INCHES SINGLE END |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.000 INCHES |
| CWDY | TEMP RATING | 50.0 AMBIENT DEG CELSIUS |
| CWFX | ROTOR SPEED RATING IN RPM | 3600.0 SINGLE NO LOAD AND 3450.0 SINGLE FULL LOAD |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.875 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| FAAZ | PHASE | THREE INPUT |
| FEAT | SPECIAL FEATURES | NO LUBRICATION REQUIRED |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
