To receive competitive purchasing options on part number 1334-MOD by Omatech Service Ltd, look no further than NSN Direct. For your reference, this item has the NSN 3416-01-037-2169 and is listed with the description “Lathe Engine.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Omatech Service Ltd parts produced under the CAGE Code 0B6Z5, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 1334-MOD, you can glean from the first four digits of its NSN 3416-01-037-2169 that it belongs to the FSC 3416 Lathes. This being said, do not hesitate to request quotes on part number 1334-MOD and any other NSN parts that we feature to experience unrivaled procurement.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| AWHA | Bed Type | SOLID |
| ACDC | Current Type | AC |
| AKSL | Purpose For Which Designed | GENERAL |
| ELEC | Voltage In Volts | 230 |
| FREQ | Frequency In Hertz | 60 |
| BTTF | Actual Swing Over Bed | 13.000 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTZR | Thread Quantity Range | +4.0/+224.0 PER INCH |
| AAXX | Mounting Type | BENCH |
| ADQR | Center To Center Distance | 30.000 INCHES MINIMUM |
| AKYD | Accessory Components And Quantity | 2 CENTER,LATHE NO.3 MORSE TAPER;1 CHUCK,COLLET,SPINDLE NOSE 1/16THRU1-3/8 IN;1 CHUCK,DRILL 1/16THRU1/2,NO.3 MORSE TAPER SHANK;1 CHUCK,4-JAW,IND.10 IN.DIA;1 CHUCK,3-JAW,UNIV.,8 IN.DIA;1 COLLET SET,FLEX RUBBER 1/16THRU 1 IN;1 EA,DOG,LATHE BENT TAIL 1/2,3/4,1,1-1/4,1-1/2,1-3/4;1 DRIVE PLATE 6-1/2 IN.DIA;1 FACEPLATE LG 12 IN.DIA;1 GEAR SET,LATHE METRIC TRANSPOSING;1 HOLDER CUTTING TOOL BORING BAR;1 EA,HOLDER CUTTING TOOL CUT-OFF,LH,RH,STRAIGHT;1 EA,HOLDER,CUTTING TOOL TURNING,LH,RH,STRAIGHT;1 HOLDER THREADING TOOL 60 DEG SHARP V-FORM;1 KNURLING TOOL,SELF-CTR LATHE W/3 PR.KNURLS DIAMOND PATTERN;1 EA,PLUG,COLLET RUBBER 1/8TO3/8,1/2TO5/8,3/4TO7/8,1TO1-1/8 IN;1 EA,REST,FOLLOWER,STEADY LATHE;1 SLEEVE CTR;1 STOP CARRIAGE LATHE MICROMETER,1 TAPER ATTACHMENT LATHE TELESCOPIC |
| APGF | Design Type | SCREW |
| BTTD | Rated Swing | 13.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 7.750 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYQ | Carriage Quantity | 1 |
| BTYW | Gear Change Type | QUICK |
| MRC | Decoded Requirement | Clear Text Reply |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | 0.029444444 |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| BTYR | Carriage Longitudinal Feed Operation Method | POWER |
| BTYS | Carriage Cross Feed Operation Method | POWER |
| AWLX | Electric Motor Quantity | 1 |
| ASHK | Electric Motor Horsepower Rating | 1.25 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
