To receive competitive purchasing options on part number 58106 by Parker Hannifin Corporation, look no further than NSN Direct. For your reference, this item has the NSN 1650-01-038-5103 and is listed with the description “Motor Hydraulic.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Parker Hannifin Corporation parts produced under the CAGE Code 93835, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 58106, you can glean from the first four digits of its NSN 1650-01-038-5103 that it belongs to the FSC 1650 Aircraft Hydraulic Vacuum and De icing System Components. This being said, do not hesitate to request quotes on part number 58106 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1650-01-038-5103 Item PartTypeName: MOTOR,HYDRAULIC | 1650 | 010385103 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 58106 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | 34.0 INCH-POUNDS |
| AAUH | SPLINE MINOR DIAMETER | 0.347 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.406 INCHES MINIMUM AND 0.409 INCHES MAXIMUM |
| AAXX | MOUNTING TYPE | FACE |
| ABSA | SPLINE QUANTITY | 12 |
| ABTB | MOUNTING HOLE DIAMETER | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.375-24 AND 0.500-20 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 3750.0 |
| AGJS | PITCH DIAMETER | 0.375 INCHES NOMINAL |
| AJAB | DRIVE SHAFT TYPE | SPLINED,INVOLUTE INTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| APJC | THREAD LOCATION | INTERNAL |
| ASAP | SPLINE PITCH | 32/64 |
| ASMM | CONNECTION QUANTITY | 3 |
| AWLS | CONNECTION TYPE | DRAIN AND INLET AND OUTLET |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | 0.650 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | MS33649-3 AND MS33649-5 AND MS33649-5 |
| AZFG | MOUNTING BOLT HOLE SPACING | 0.935 IN. BY 0.935 IN. |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
