To receive competitive purchasing options on part number R22733 by Parker Hannifin Corporation, look no further than NSN Direct. For your reference, this item has the NSN 4720-00-819-5370 and is listed with the description “Hose Assembly Nonmetallic.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Parker Hannifin Corporation parts produced under the CAGE Code 50599, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number R22733, you can glean from the first four digits of its NSN 4720-00-819-5370 that it belongs to the FSC 4720 Hose and Tubing Flexible. This being said, do not hesitate to request quotes on part number R22733 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-819-5370 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 008195370 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R22733 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 10.500 INCHES |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.800 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQBD | BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE,50599,HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.375 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.375 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.672 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.800 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.800 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.800 INCHES NOMINAL 2ND END |
| AFQN | FLANGE LENGTH | 2.400 INCHES NOMINAL 1ST END |
| AFQN | FLANGE LENGTH | 2.400 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 2.400 INCHES NOMINAL 1ST END |
| AGFF | FLANGE WIDTH | 2.400 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 1ST END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.275 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.275 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.020 INCHES NOMINAL 1ST END |
| AJED | RAISED FACE HEIGHT | 0.020 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 2.121 INCHES NOMINAL 1ST END |
| AJEE | RAISED FACE DIAMETER | 2.121 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRXX | MEASURING METHOD AND LENGTH | 17.000 INCHES NOMINAL WORKING |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
