To receive competitive purchasing options on part number 65D35226-7 by Standard Manufacturing Co Inc, look no further than NSN Direct. For your reference, this item has the NSN 2520-00-943-8474 and is listed with the description “Shaft Axle Automotive.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Standard Manufacturing Co Inc parts produced under the CAGE Code 98296, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 65D35226-7, you can glean from the first four digits of its NSN 2520-00-943-8474 that it belongs to the FSC 2520 Vehicle Power Transmission Components. This being said, do not hesitate to request quotes on part number 65D35226-7 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-943-8474 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 009438474 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 65D35226-7 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 20.500 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 42.0 MAXIMUM ROCKWELL C |
| AMDM | FIRST END SPLINE LENGTH | 1.619 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.265 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.495 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 1.136 INCHES NOMINAL |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 6 |
| BBCF | SECOND END SPLINE QUANTITY | 19 |
| BNPJ | FIRST END FACILITY DIAMETER | 1.031 INCHES NOMINAL |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTC | FIRST END FACILITY WIDTH | 0.125 INCHES NOMINAL |
| BNTD | FIRST END FACILITY LOCATION | 0.219 IN. FROM SHAFT END |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4130 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
