To receive competitive purchasing options on part number VAS1 7 16 by Timken Corporation, look no further than NSN Direct. For your reference, this item has the NSN 3130-01-324-8895 and is listed with the description “Bearing Unit Ball.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Timken Corporation parts produced under the CAGE Code 21335, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number VAS1 7 16, you can glean from the first four digits of its NSN 3130-01-324-8895 that it belongs to the FSC 3130 Bearings Mounted. This being said, do not hesitate to request quotes on part number VAS1 7 16 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-324-8895 Item PartTypeName: BEARING UNIT,BALL | 3130 | 013248895 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VAS1 7/16 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| ANKH | COLLAR LOCATION | ONE END |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| ABVG | MOUNTING SLOT LENGTH | 0.875 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 3.688 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 6.750 INCHES NOMINAL |
| AGNF | BASE LENGTH | 1.750 INCHES NOMINAL |
| AMCL | BLOCK TYPE | FIXED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 5.000 INCHES NOMINAL |
| ANKF | SEAL LOCATION | BOTH ENDS |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| MATT | MATERIAL | IRON CAST HOUSING |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
| ABTD | MOUNTING SLOT WIDTH | 0.562 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.4375 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.719 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHZC | ASSEMBLY OVERALL LENGTH | 2.031 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.875 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| MATT | MATERIAL | STEEL BEARING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
