To receive competitive purchasing options on part number ST9M496-C1WA by Trico Manufacturing Inc, look no further than NSN Direct. For your reference, this item has the NSN 5340-01-102-7990 and is listed with the description “Bracket Angle.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Trico Manufacturing Inc parts produced under the CAGE Code 59570, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number ST9M496-C1WA, you can glean from the first four digits of its NSN 5340-01-102-7990 that it belongs to the FSC 5340 Hardware Commercial. This being said, do not hesitate to request quotes on part number ST9M496-C1WA and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-102-7990 Item PartTypeName: BRACKET,ANGLE | 5340 | 011027990 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10117627 | 2 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.800 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.300 INCHES NOMINAL |
| AHLG | SECOND LEG CORNER RADIUS | 0.300 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.550 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| AHLZ | SECOND LEG SLOT LENGTH | 0.505 INCHES NOMINAL |
| AHMA | SECOND LEG SLOT WIDTH | 0.224 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.071 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.071 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| AHQP | FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | LEFT HAND AND INVERTED CLIP NUT INSTALLATION |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T72 OR T61 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CHROMATE AND PRIMER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
