To receive competitive purchasing options on part number 752824 by Turbo Power And Marine System Inc, look no further than NSN Direct. For your reference, this item has the NSN 5340-01-037-8791 and is listed with the description “Bracket Angle.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Turbo Power And Marine System Inc parts produced under the CAGE Code 11449, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 752824, you can glean from the first four digits of its NSN 5340-01-037-8791 that it belongs to the FSC 5340 Hardware Commercial. This being said, do not hesitate to request quotes on part number 752824 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-037-8791 Item PartTypeName: BRACKET,ANGLE | 5340 | 010378791 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 752824 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 1.440 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 2.100 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 0.223 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.453 INCHES NOMINAL |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.440 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.085 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.110 INCHES NOMINAL |
| AJFQ | SECOND LEG END RADIUS | 0.380 INCHES NOMINAL |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | END RADIUS AND TAPERED |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | DUE TO CRITICAL FEATURES,TOLERANCES,FIT RESTRICTIONS,MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM,DEATH OR SERIOUS INJURY |
| MATT | MATERIAL | STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
