To receive competitive purchasing options on part number 1565 by Wabco Construction And Mining, look no further than NSN Direct. For your reference, this item has the NSN 3020-00-430-5897 and is listed with the description “Gear Bevel.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Wabco Construction And Mining parts produced under the CAGE Code 00447, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number 1565, you can glean from the first four digits of its NSN 3020-00-430-5897 that it belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. This being said, do not hesitate to request quotes on part number 1565 and any other NSN parts that we feature to experience unrivaled procurement.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| AGJS | PITCH DIAMETER | 7.3330 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 52.3 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.7390 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 3.335 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWQD | PITCH ANGLE | 52.3000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.531 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 1.875 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.750 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.438 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.0935 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 3.500 INCHES FIRST END |
| CWWH | END NOMINAL LENGTH | 0.156 INCHES SECOND END |
| CWWN | END NOMINAL DIAMETER | 2.250 INCHES SECOND END |
| CWWS | FIRST STEP NOMINAL LENGTH | 1.375 INCHES SECOND END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 3.500 INCHES FIRST END |
| MATT | III MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
