To receive competitive purchasing options on part number GD93C5 by Wisconsin Motors Llc, look no further than NSN Direct. For your reference, this item has the NSN 3020-00-358-7204 and is listed with the description “Gear Helical.” If this matches your needs, we encourage you to fill out the partially-completed quote request form on this page to kick off procurement. By providing comprehensive information about your requirements, such as your desired quantity, pricing, and fulfillment speed, our experts can formulate the most fitting solutions for you. We want to ensure that this process is quick and effortless, so we routinely respond to requests within 15 minutes of receiving and reviewing them.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to our streamlined quotation service, we also aim to make the process of finding products simple. As such, if you require other Wisconsin Motors Llc parts produced under the CAGE Code 66289, you can peruse our manufacturer or CAGE Code catalogs, or use our search engine and filters. Furthermore, if you want to locate items similar to part number GD93C5, you can glean from the first four digits of its NSN 3020-00-358-7204 that it belongs to the FSC 3020 Gear Pulley Sprocket and Transmission Chain. This being said, do not hesitate to request quotes on part number GD93C5 and any other NSN parts that we feature to experience unrivaled procurement.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-358-7204 Item PartTypeName: GEAR,HELICAL | 3020 | 003587204 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3956 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 2.5310 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.631 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 18.7665 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.0360 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.465 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.624 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.938 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TONE GROOVE 0.312 IN. MIN 0.315 IN. MAX W 1ST END ON BODY OF GEAR,TIMING MARK LOCATED 1.125 IN. FROM CENTER OF BORE 9 DEG 10 MIN CCW FROM CENTERLINE OF GROOVE ON 2ND END,FIGURE X ON FACE OF GEAR TOOTH 135 DEG CW FROM TIMING MARK |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,C1113,C1115,C1117 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
